Designer Concrete Coatings

Important PDS Information

*Clear & *Colour Tinted Concrete Sealers & Solvents

*Important PDS Information: All acrylic co-polymer solvent-based sealers made for exposed concrete flatwork applications will deteriorate from the subsequent effects of time and by traffic abrasion wear and undue influence of environment conditions and in-service use to which all pavement surfaces are subjected. No representation, warranty or guarantee is or can be made for expected design life performance. It is the user’s responsibility to satisfy themselves as to the suitability or fitness for use of the product and to carry out product installation in a proper and workmanlike manner for their own particular use and specific application. The product is strictly limited for use on concrete flatwork surfaces. It is not compatible for sealing clay-based paving bricks or tiles or natural stone masonry. Not recommended for use on steep sloping concrete pavements or ramps usually associated with hilly residential or commercial locations.


*Clear Concrete Sealer:

*Important PDS Information: The product is not designed to act as a barrier against staining agents and particularly surface stains from leaves and other organic foreign matter and from petro-chemical spillages. The product is not recommended for use on steep sloping concrete pavements or concrete ramps usually associated with hilly residential or commercial locations.

MSDS | Contact us | Back to top

*Clear Sealer Base (19Lt) & Colour Tinter (1Lt):

*Important PDS Information: The product is supplied separately and sold in kit form comprising of 19-litre pail clear sealer base & 1-litre container colour tint concentrate when mixed makes 20-litres coloured concrete sealer. The product user accepts  no guarantee is or can be given for workmanship and it is the user’s responsibility to satisfy themselves as to the suitability and application procedures necessary of the product and fitness for use of the product in the user’s specific application and expected outcomes of the work.

Contact us | Back to top

*Prime & Seal Concrete Sealer:

*Important PDS Information: The product is purpose designed for use as a concrete priming agent compatible with DCC Clear Concrete Sealer installed as the finish coat. The product can be similarly used, subject to limitations, as a concrete curing aid if applied at the appropriate time to fresh cast-in-place decorative coloured concrete flatwork to promote concrete strength & durability. The product has limited surface-film design life of approximately 3-months from the date of application and will require over-coating with DCC Clear Concrete Sealer unless otherwise specified as a sacrificial product limited to early general protection of the slab surface from air-borne or trafficked foreign matter usually associated with building trades carrying out works on new residential or commercial construction projects.

Contact us | Back to top

2 Component Waterborne Polyurethane

Contact us | Back to top

Supa Impregnation

Contact us | Back to top

*DCC Concrete Densifier

*Important PDS Information: The product requires staged installation method of application to ensure acceptable product performance. It is the product user’s responsibility to read and carry out the recommended application method in the proper and workmanlike manner and to satisfy themselves as to the suitability of the product and compatibility of the product used in combination with any other product or in any process of their own specific or particular application.

MSDS | Contact us | Back to top

Solvent

MSDS | Contact us | Back to top

Repsol

MSDS | Contact us | Back to top

Tyre Mark Remover

MSDS | Contact us | Back to top

*Paint Stripper

*Important PDS Information: The product user accepts that they must read and carry out all safe handling instructions issued on the drum label by the proprietary manufacturer; and, that product use requires workmanship method recommended by the proprietary manufacturer and use of environment protection measures by the user to prevent product waste disposal from entering storm water drains and/or water courses. Appropriate masking of adjacent areas to the work site may or will be required if the product is used in combination with high-pressure water blasting equipment.

Contact us | Back to top

Designer Concrete Coatings Pty Ltd recommends product use by experienced licensed tradespersons with relevant insurance currency to carry out the work. DIY product use is not advised except if the user responsibly satisfies themself as to the suitability of their workmanship competency and ability to carry out the installation of the product in the proper manner recommended by the product manufacturer and relies on their own examination of product suitability, precautions and limitations of use and any processes required of the product consistent for the purpose intended of the product and warrants the same.

For product information / technical support service contact Designer Concrete Coatings Pty Ltd - Head Office, Ingleburn NSW: Ph: 9829 3311 / Fax: 9829 3544

TOP | BACK