Sealers and Solvents

Designer Concrete Coatings Sealers
SEALERS AND SOLVENTS

In addition to our concrete coating products, we also offer a leading range of sealer and solvents. Every product has been designed by the Designer Concrete Coating’s team, and carefully tested to ensure they work perfectly with our coatings and protect our stamping and stencilling.

These products are designed to cure and protect your concrete immediately after it has been laid, improve clean ability as well as to help in maintaining the original aesthetic.

OUR SEALER AND SOLVENT RANGE

Clear Concrete Sealer: This sealer has a proven ability to stand up to both foot and vehicle traffic and maintain the appearance of the finish. It is resistant to weather and sun exposure. This type of sealer is perfect for patterned and stamped concrete as it helps keep the surface clean, so the decorative elements can shine.

Clear Sealer Base and Colour Tinter: The tint allows you to add colour to your grey concrete or old pattern concrete pavement.

MORE SEALERS AND SOLVENTS

2 Component Waterborne Polyurethane: This product is hard wearing and chemical and stain resistant. It’s perfect for any areas where oil spills are an issue and is perfect for areas such as garages, commercial floors and shops and really performs well at maintaining the aesthetic performance of concrete.

Supa Impregnation: Our Supa product repels water and is resistant to corrosive elements. As well as concrete, it also works well for natural stone or other masonry surfaces.

Designer Concrete Coatings Concrete Densifier: If you have any old concrete that is showing evidence of softening, dusting or chalking, you need this product. It densifies your concrete and breathes new life into your hardscaped area.

EVEN MORE SEALERS AND SOLVENTS

Solvent: This solvent allows the sealer to penetrate more deeply into the concrete when this is required before the application of the final coat. It also helps to dilute and thin existing sealer so the fresh layer can offer better protection and adhesion.

Repsol: Freshly placed sealer can sometimes get a white milky look on the surface, Repsol remedies this by pulling the moisture out of the sealer. It is also recommended to apply Repsol to pre-existing sealed surfaces prior to resealing.

Tyre Mark Remover: A common place for decorative concrete is a driveway. There’s nothing worse than tyre marks, and our remover is proven to clear sealed decorative surfaces.

BUT WAIT, THERE’S STILL MORE

Prime and Seal Concrete Sealer: This product aids the curing process and creates a first coat to help protect the freshly laid concrete. The sealer also makes for a primer for the second coat of Decorative Concrete Sealer.

Paint Stripper: This stripper removes acrylic co-polymer sealers from coloured concrete surfaces that need to be stripped before resealing.

GET IN TOUCH

Phone: 02 9829 3311

Email: sales@designerconcrete.com.au

USEFUL LINKS

GET YOUR FREE, NO OBLIGATION QUOTE

You can get in touch with us for further information on our products, or to be put in contact your closest distributor.